Selection guide for LIC: LIC 4115/LIC 4195

Specifications

Linear scale	LIC 4005
Measuring standard Coefficient of linear expansion	Steel scale tape with METALLUR absolute and incremental track Depends on the mounting surface
Accuracy grade	±5 µm
Baseline error	≤ ±0.750 µm/50 mm (typical)
Measuring length ML* in mm	140 240 340 440 540 640 740 840 940 1040 1140 1240 1340 1440 1540 1640 1740 1840 1940 2040
	Larger measuring lengths up to 28 440 mm with a single-section scale tape and individual scale-carrier sections
Mass Scale tape Parts kit Scale-tape carrier	31 g/m 80 g + n4) × 27 g 187 g/m

Scanning head	LIC 411 scanning head	AK LIC 419 F	AK LIC 419 M		AK LIC 419 P
Interface	EnDat 2.2	Fanuc Serial Interface αi interface	Mitsubishi high speed interface		Panasonic Serial Interface
Ordering designation*	EnDat22	Fanuc05	Mit03-4	Mit02-2	Pana01
Measuring step*	0.01 µm (10 nm) 0.005 µm (5 nm) 0.001 µm (1 nm)		0.01 µm (10 nm) 0.005 µm (5 nm)2) 0.001 µm (1 nm)3)		0.01 µm (10 nm) 0.005 µm (5 nm) 0.001 µm (1 nm)
Calculation time tcal Clock frequency	≤ 5 µs 16 MHz	–
Traversing speed1)	≤ 600 m/min
Interpolation error	±20 nm
Electrical connection*	Cable, 1 m or 3 m with 8-pin M12 coupling (male) or 15-pin D-sub connector (male)
Cable length (with HEIDENHAIN cable)	≤ 100 m	≤ 50 m	≤ 30 m		≤ 50 m
Voltage supply	DC 3.6 V to 14 V
Power consumption1) (max.)	At 3.6 V: ≤ 800 mW At 14 V: ≤ 900 mW	At 3.6 V: ≤ 950 mW At 14 V: ≤ 1050 mW
Current consumption (typical)	At 5 V: 75 mA (without load)	At 5 V: 95 mA (without load)
Vibration 55 Hz to 2000 Hz Shock 6 ms	≤ 500 m/s2 (EN 60 068-2-6) ≤ 1000 m/s2 (EN 60 068-2-27)
Operating temperature	–10 °C to 70 °C
Mass Scanning head Connecting cable Connector	≤ 18 g (without cable) 20 g/m M12 coupling: 15 g; D-sub connector: 32 g
* Please select when ordering 1) See General electrical information in the brochure Interfaces for HEIDENHAIN Encoders 2) Up to measuring length ML ≤ 21 040 3) Up to measuring length ML ≤ 4140 4) n = 1 at ML 3140 mm to 5040 mm; n = 2 at ML 5140 mm to 7040 mm; etc.*