
ND 522 |
ND 523 |
|
Axes |
2 axes from A to Z |
3 axes from A to Z and ZS |
Encoder inputs |
2 x TTL; D-sub female 9-pin |
3 x TTL; D-sub female 9-pin |
Input frequency |
100 kHz |
|
Signal period |
2 µm, 4 µm, 10 µm, 20 µm, 40 µm, 100 µm, 10 240 µm, 12 800 µm |
|
Line count |
Any |
|
Evaluation |
1/2/4-fold |
|
Display step 1) |
Linear axis: 1 mm to 0.000 1 mm; 0.005 with LS 328/LS 628 Angular axis: 1° to 0.000 1° (00° 00‘ 01'') |
|
Display |
Monochrome flat screen for position values, dialog and input displays, graphic functions and graphic positioning support |
|
Status display |
Operating mode, REF, reference-point number, tool number, inch, scale, feed-rate display, stopwatch |
|
For milling/drilling/boring |
Tool compensation R+, R– |
|
For turning |
Radius/diameter display Separate or sum display for Z and ZO |
|
Functions |
|
|
For milling/drilling/boring |
|
|
For turning |
|
|
Error compensation |
Axis error: Linear and multipoint over up to 200 points Backlash compensation: For length measurement via ball screw and rotary encoder |
|
Data interface |
USB type B connector; 115 200 baud
|
|
Accessories |
Base, mounting arm |
|
Power connection |
100 V to 240 V AC (–15 % to +10 %), 48 Hz to 62 Hz; 54 W |
|
Operating temperature |
0 °C to 45 °C (storage temperature –20 °C to 70 °C) |
|
Protection EN 60 529 |
IP 40, front panel IP 54 |
|
Weight |
Approx. 2.6 kg |
|
1) Depends on the signal period or line count of the connected encoder |