Menü überspringen

MANUALplus 620

Request

Specifications

Components

MC main computer
Integrated operating panel and 12.1-inch TFT color flat-panel display

CC or UEC controller units

Machine operating panel with 36 exchangeable snap-on keys as well as spindle and feed rate override potentiometers

Operating system

HEROS 5 real-time operating system for machine control

NC program memory

1.8 GB (on compact flash memory card CFR)

Input resolution and
display step

X axis: 0.5 µm, diameter: 1 µm

U, V, W, Y, Z axis: 1 µm

B, C1/C2 axis: 0.001°

Interpolation

Straight line: in 2 principal axes (max. ±100 m), optional in 3 principal axes

Circle: in 2 axes (radius max. 999 m), optional additional linear interpolation of the third axis

C1/C2 axis: interpolation of X and Z linear axes with the C1/C2 axis (option)

Feed rate

mm/min or mm/rev

Constant surface speed

Max. feed rate (60 000/pole pairs × ball screw pitch) at fPWM = 5000 Hz

Spindle

Maximum 60 000 rpm (with 2 pole pairs)

Axis feedback control

Integrated digital drive control for synchronous and asynchronous motors

Position loop resolution: Signal period of the position encoder/1024

Cycle time of position controller: 0.2 ms

Cycle time of speed controller: 0.2 ms

Cycle time of current controller: minimum 0.05 ms

Error compensation

Linear and nonlinear axis error, backlash, reversal peaks during circular movements

Static friction

Data interfaces

Gigabit Ethernet interface 1000BASE-T

3 x USB (1 x front USB 2.0; 2 x rear USB 3.0)

Diagnostics

Fast and simple troubleshooting through integrated diagnostic aids

Ambient temperature

Operation: In electrical cabinet: 5 °C to 40 °C
In operating panel: 0 °C to 50 °C

Storage: –20 °C to 60 °C